MS90386 Indicator, Elapsed Time, Electrochemical Mercury 115 Volt Ac 50/2400 Hz, 28 Volt Dc Or 5 Volt Dc

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7

MS90386D

5.4 The 5Vdc indicators do not have an internal voltage regulator and must be used with precision logic power supplies.

5.5 In the event of conflict between this specification and the references cited herein, This specification shall take precedence.

CHANGES FROM PREVIOUS ISSUE: No technical changes were made during this revision. Revision is to prepare a clean copy. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.

TABLE I. Timer specifications.

MS Dash Number		Panel Mounting Method	Rated Voltage	Hours Range	V Cell Maximum Millivolts DC	V Reg 100 Ohms, Microvolts		Shock Class (g)	Thermal Shock (Cycles)
Vertical	Horizontal	Panel Mounting Method	Rated Voltage	Hours Range	V Cell Maximum Millivolts DC	Min	Max	Shock Class (g)	Thermal Shock (Cycles)
-1	-1H	Below	115 Vac	1000	10	358	442	50	5
-2	-2H	Below	28 Vdc	1000	10	358	442	50	5
-3	-3H	Above	115 Vac	1000	10	358	442	50	5
-4	-4H	Above	28 Vdc	1000	10	358	442	50	5
-5	-5H	Below	115 Vac	5000	10	71	89	50	5
-6	-6H	Below	28 Vdc	5000	10	71	89	50	5
-7	-7H	Above	115 Vac	5000	10	71	89	50	5
-8	-8H	Above	28 Vdc	5000	10	71	89	50	5
-9	-9H	Below	5 Vdc	1000	10	358	442	50	5
-10	-10H	Above	5 Vdc	1000	10	358	442	50	5
-11	-11H	Below	5 Vdc	5000	10	71	89	50	5
-12	-12H	Above	5 Vdc	5000	10	71	89	50	5
-101	-101H	Below	115 Vac	1000	40	350	440	100	10
-102	-102H	Below	28 Vdc	1000	40	350	440	100	10
-103	-103H	Above	115 Vac	1000	40	350	440	100	10
-104	-104H	Above	28 Vdc	1000	40	350	440	100	10
-105	-105H	Below	115 Vac	5000	20	70	88	100	10
-106	-106H	Below	28 Vdc	5000	20	70	88	100	10
-107	-107H	Above	115 Vac	5000	20	70	88	100	10
-108	-108H	Above	28 Vdc	5000	20	70	88	100	10
-109	-109H	Below	5 Vdc	1000	40	350	440	100	10
-110	-110H	Above	5 Vdc	1000	40	350	440	100	10
-111	-111H	Below	5 Vdc	5000	20	70	88	100	10
-112	-112H	Above	5 Vdc	5000	20	70	88	100	10