INCH-POUNDS
MS90373B
20 April 2009
SUPERSEDING MS90373A(AS)
7 October 1987
DETAIL SPECIFICATION
INDICATOR, ELAPSED TIME, ELECTROCHEMICAL (COPPER)
115V 50/2400 Hz AC OR 28V DC Inactive for new design after 23 July 1997.
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
The requirements for acquiring the product described herein shall consist of this Military
Specification Sheet and MIL-DTL-81219.
1 PART OR IDENTIFYING NUMBER (PIN)
1.1 PIN. The PIN is formed as follows: MS90373 - X
Part description number per table I Specification number
1.2 Assemblies. Indicator assemblies are made of the following components: MS90373-1 - -3 indicating cell, -4 holder and -5 regulator
MS90373-2 - -3 indicating cell, -4 holder and -6 regulator
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-
5616 or e-mailed to STDZNMGT@DLA.MIL. Since contact information can change, you may want to verify the currency of this address information using the ASSIST database at https://assist.daps.dla.mil.
AMSC N/A FSC 6645
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business