A-A-1457A
Workmanship. The timers shall be free from any defects which may impair their appearance, durability or serviceability.
QUALITY ASSURANCE PROVISIONS.
Responsibility for inspection and tests. Unless otherwise specified in the contract or purchase order, the supplier is responsible for the performance of all inspection requirements as specified herein.
Sampling. Sampling for visual inspection and testing shall be in accordance with the provisions of MIL-STD-105. Unless otherwise specified, Inspection Level II with AQL 2.5 percent defective for visual inspection and level S-2, AQL 1.5 percent defective for testing shall apply.
Inspection. Samples selected in accordance with the requirements herein shall be visually inspected to verify conformance to dimensional and workmanship requirements of the CID. Any departure from specified requirements may be grounds rejection.
Testing.
Alarm. The alarm shall sound only at the end of the desired interval and shall be audible from a distance of 7.5 meters.
Clock mechanism. The clock mechanism shall be spring driven and capable of running 8 hours without rewinding. It shall be accurate to + 3 seconds per minute and shall have a regulator capable of adjusting to, and maintaining an accuracy of 120 seconds per hour.
Regulatory requirements. In accordance with section 23.403 of the Federal Acquisition Regulations (FAR) , the Government’s policy is to acquire items composed of the highest percentage of recovered materials practicable, consistent with maintaining a satisfactory level of competition without adversely affecting performance requirements or exposing supplier’s employees to undue hazards from the recovered materials.
Preservation, packaging, packing, labeling and marking. The preservation, packaging, packing, labeling and marking shall be as specified in the contract or purchase order.
Copies of MIL-STD-105 can be obtained from the Standardization Document Order Desk, 700 Robbins Ave., Bldg 4D, Philadelphia, PA 19111- 5094.
NOTE. Purchaser shall specify NSN 6645-00-732-7789.
PREPARING ACTIVITY:
GSA - FSS
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business